| FEATURES |
POLYUREA |
FIBERGLASS |
| ODOR: |
Odorless during and after application |
Offensive Odor During Application |
| CORROSION PROTECTION: |
YES |
NO |
| ABRASION RESISTANCE: |
YES |
NO |
| TEMPERATURE DURING APPLICATION: |
As low as 20°F (even in high humidity) |
Above 50°F as per Manufacturer's Specs |
| WATERPROOF: |
YES |
YES, If Applied As Per Manufacturer's Specs |
| SEAMLESS: |
100% |
NO |
| FLEXIBLE: |
From -40°F to 190°F
Elongation at 427% |
NO, 0% Elongation and very rigid |
| COATING THICKNESS: |
Up to 1/4 during a single application
Helps eliminate "ponding" and allows pitch to be directed. |
Approximately 1/8° without uniform thickness |
| COMPATIBLE SUBSTRATES: |
Wood, metal, fiberglass and concrete |
Primarily wood, concrete with varied results |
| MANUFACTURERS WARRANTY: |
YES |
NO |
| ARE CHAMFER STRIPS NEEDED: |
No, not necessary. A savings of time and money... and a better look! |
Yes, due to the fact that fiberglass is not seamless and a transition from floor to wall is required. |
